Troubleshooting Connectivity
Use this guide to diagnose and resolve common machine connection issues in the Control App.
Bluetooth (Sprint & Quantum)
macOS cannot connect to Quantum or Sprint 1 over Bluetooth; use Ethernet instead. Some Android tablets, particularly Samsung models, also require Ethernet. If your Quantum was set up for Control App 7, follow Configure the Anybus Wireless Bridge II before using Control App 8 or Android. Check connection options for your platform before troubleshooting Bluetooth.
- Ensure you are within range of the machine. Walls, especially thicker walls, severely limits bluetooth range.
- Bluetooth is also sensitive to disturbances. Check for nearby sources of radio waves such as WiFi routers and wireless speakers. But also poorly shielded power cables and microwave ovens can cause interference.
- If this is the first time connecting to machine, you may need to Pairing it first.
Wi-Fi (Sprint 2, Cable & Squat)
- Ensure you are connected to the same Wifi network as the 1080 machine.
- Ensure that the wifi does not have Client Isolation enabled (sometimes also known as AP Isolation or Guest Isolation).
This setting prevents the 1080 software from communicating with the sprint
- A workaround if the network settings cannot be changed is to use a mobile phone as a hotspot, or use a dedicated mobile router. This has the added benefit that it works in places where there is no other Wi-Fi.
Client Isolation is a very common setting on public Wi-Fis in hotels and venues. Similarly, the 'Guest Network' setting on many consumer grade routers typically also have this turned on.
- If the wifi require additional login or acceptance of terms (i.e. a landing page that opens in a web browser after connecting to the network), the sprint2 machine will not be able to connect to it.
- If the windows firewall was configured just now using the button in the connect machine dialog, the application need to be restarted for the setting to apply. This is a limitation in Windows.
- If, for some reason, the automatic firewall configuration does not work, the firewall rule has to be created manually.
# This powershell command creates a firewall rule that allows the 1080 software to scan for machines on the connected wifi network New-NetFirewallRule -DisplayName "1080 Motion Device Discovery" -Name "TemDeviceDiscoveryRule" -Direction Inbound -LocalPort 5444 -Protocol TCP -Profile Any -Action Allow
Generic
- If the software consistently fails to connect, then restarting the machine and/or the tablet can sometimes help.
- Check for software updates
- Make sure 1080 software is the latest version
- Make sure all windows updates are installed