---
title: "IP Settings"
slug: "ip-settings"
updated: 2024-12-05T11:58:58Z
published: 2024-12-05T11:58:58Z
canonical: "docs.1080motion.com/ip-settings"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.1080motion.com/llms.txt
> Use this file to discover all available pages before exploring further.

# IP Settings

To be able to communicate with the 1080 sprint or quantum, the IP address of the **Bluetooth Network Connection** in Windows must be set to the correct value.

- IP assignment should be *Manual*
- IP Address should be either `192.168.250.111` or `192.168.250.222` depending on which type of machine you  

want to connect to. See table below.
- Subnet mask should be `255.255.255.255`

| Machine Type | IP Address | Subnet mask |
| --- | --- | --- |
| 1080 Sprint or Single Quantum | 192.168.250.111 | 255.255.255.0 |
| 1080 Quantum (Single machine) | 192.168.250.111 | 255.255.255.0 |
| 1080 Quantum Synchro Left | 192.168.250.111 | 255.255.255.0 |
| 1080 Quantum Synchro Right | 192.168.250.222 | 255.255.255.0 |

## In Windows 11

1. From **Start**, open **Settings*
2. Select **Network & Internet**
3. Select **Advanced network settings** at the bottom of the screen
4. Click on **Bluetooth Network Connection** and then **View additional properties** ![windows11-btpan1](https://cdn.document360.io/2720a32a-6d48-40c3-870e-0cf3536ac843/Images/Documentation/windows11-btpan1.png)
5. Click **Edit** on **IP assignment** ![windows11-btpan2](https://cdn.document360.io/2720a32a-6d48-40c3-870e-0cf3536ac843/Images/Documentation/windows11-btpan2.png)
6. Set to **Manual** and then enter the correct **IP Address** and **Subnet mask**. Don't forget to **save**. ![windows11-btpan3](https://cdn.document360.io/2720a32a-6d48-40c3-870e-0cf3536ac843/Images/Documentation/windows11-btpan3.png)

Once done, it should look like this under IPv4:

![windows11-correct](https://cdn.document360.io/2720a32a-6d48-40c3-870e-0cf3536ac843/Images/Documentation/windows11-correct.png)

> Note: DNS and IPv6 settings does not matter

## Windows 10

1. In Windows 10, find the network adapter settings under **Network Connections** in the control panel

![windows10-btpan1](https://cdn.document360.io/2720a32a-6d48-40c3-870e-0cf3536ac843/Images/Documentation/windows10-btpan1.png)
2. Right click the **Bluetooth Network Connection** icon and select **Properties**
3. Select **Internet Procol Version 4** and click **Properties**

![windows10-btpan2](https://cdn.document360.io/2720a32a-6d48-40c3-870e-0cf3536ac843/Images/Documentation/windows10-btpan2.png)
4. Choose **Use the following IP address** and enter the correct values according to the table above.

![windows10-btpan3](https://cdn.document360.io/2720a32a-6d48-40c3-870e-0cf3536ac843/Images/Documentation/windows10-btpan3.png)
5. Click **OK* to save the settings