To be able to communicate with the 1080 sprint or quantum, the IP address of the Bluetooth Network Connection in
Windows must be set to the correct value.
- IP assignment should be Manual
- IP Address should be either
192.168.250.111or192.168.250.222depending on which type of machine you
want to connect to. See table below. - Subnet mask should be
255.255.255.255
| Machine Type | IP Address | Subnet mask |
|---|---|---|
| 1080 Sprint or Single Quantum | 192.168.250.111 | 255.255.255.0 |
| 1080 Quantum (Single machine) | 192.168.250.111 | 255.255.255.0 |
| 1080 Quantum Synchro Left | 192.168.250.111 | 255.255.255.0 |
| 1080 Quantum Synchro Right | 192.168.250.222 | 255.255.255.0 |
In Windows 11
-
From Start, open *Settings
-
Select Network & Internet
-
Select Advanced network settings at the bottom of the screen
-
Click on Bluetooth Network Connection and then View additional properties
-
Click Edit on IP assignment
-
Set to Manual and then enter the correct IP Address and Subnet mask. Don't forget to save.
Once done, it should look like this under IPv4:
Note: DNS and IPv6 settings does not matter
Windows 10
-
In Windows 10, find the network adapter settings under Network Connections in the control panel
-
Right click the Bluetooth Network Connection icon and select Properties
-
Select Internet Procol Version 4 and click Properties
-
Choose Use the following IP address and enter the correct values according to the table above.
-
Click *OK to save the settings