---
title: "How to Attach a Quick Release Strap to Sprint 2"
slug: "how-to-attach-a-quick-release-strap-to-sprint-2"
updated: 2025-12-08T15:54:37Z
published: 2025-12-08T15:54:37Z
canonical: "docs.1080motion.com/how-to-attach-a-quick-release-strap-to-sprint-2"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.1080motion.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to Attach a Quick Release Strap to Sprint 2

[Video](https://cdn.document360.io/2720a32a-6d48-40c3-870e-0cf3536ac843/Images/Documentation/output_4k25_qt.mp4)

This guide shows you how to properly attach a quick release strap to your Sprint 2 system. Follow the steps below and refer to the images for clarity.

---

## Step 1 – Tie an Overhand Loop Knot

Start by making an **Overhand Loop Knot** (also called an *Overhand on a Bight*) at the end of the yellow cord.

1. Fold the cord back on itself to form a U-shape (a bight).
2. Tie an overhand knot using the doubled section.
3. Leave a small fixed loop at the end of the cord.

This loop will be used to attach the cord securely to the strap.

![Safety velcro strap 2.jpg](https://cdn.document360.io/2720a32a-6d48-40c3-870e-0cf3536ac843/Images/Documentation/Safety%20velcro%20strap%202.jpg)

---

## Step 2 – Attach the Loop to the Strap

Take the loop you just created and attach it to the strap:

1. Pass the loop through the **black metal D-ring** on the quick release strap.
2. Feed the **entire strap** back through the yellow loop.
3. Pull the strap tight — the loop will cinch around the D-ring, locking the strap in place.

![Safety velcro strap 3.jpg](https://cdn.document360.io/2720a32a-6d48-40c3-870e-0cf3536ac843/Images/Documentation/Safety%20velcro%20strap%203.jpg)

---

## Optional Finishing Touch

If there is extra cord left over:

- You can **cut off the excess length**.
- Carefully **melt the end with a lighter** to prevent fraying.

---

✅ You’ve now successfully attached the quick release strap to Sprint 2.